• User manual: HormoLisse & HormoPause

  • Thank you for choosing one of our IPL hair removal devices designed for home use. For optimal and safe use, please read this manual carefully before using the product.

    What is IPL?

    IPL (Intense Pulsed Light) is a technology that emits high-intensity pulsed light. This light is absorbed by the hair pigment and acts on the follicle to slow down regrowth.

    • Regular sessions lead to a gradual decrease in density and regrowth speed.
    • The first results generally appear after several weeks of consistent treatment.
    • A maintenance phase is necessary to maintain lasting results.

    Expected results

    • Gradual reduction in the number of visible hairs.
    • Finer, lighter hairs that regrow more slowly.
    • Softer and clearer skin over the sessions.

    Key differences between models

    • HormoLisse: designed for hormonal hair growth related to PCOS. It can be used on the face and body (excluding prohibited areas such as around the eyes and mucous membranes).
    • HormoPause: developed for hormonal hair growth related to menopause, particularly for treating white and light hairs, and usable on the entire body (excluding prohibited areas).

  • Safety first

  • To protect the skin, the device is not suitable in the following cases:

    • You suffer from a known skin disorder.
    • You have a skin disease such as allergic dermatitis, eczema, etc.
    • You exhibit photosensitivity (natural or induced by medications).
    • You are in a menstruation period, or if you are pregnant or breastfeeding.
    • You have a recent sunburn.
    • You have a black or dark brown nevus.
    • You have damaged skin: open wound, scab, recent scar, skin cancer, or hemangioma.
    • Area of the eyes or any area that has undergone aesthetic, prosthetic, or plastic intervention (e.g. injections, implants).

  • 2. Product Presentation

  • 2.1 Product content:

    • 1 × IPL Device
    • 1 × Power Adapter
    • 1 × Protective Glasses
    • 1 × Razor
    • 1 × User Manual

      2.2 Description of the devices:

  • 4. Presentation of functions

    • Skin rejuvenation
    • Hair removal

    Product usage :

    This product can be used to treat excess hair such as:

    • the hair on the lips,
    • the hair in the armpits,
    • the hair on the arms and legs,
    • the hair on the forehead, etc.


    HormoLisse :

  • HormoPause :

  • 5. Instructions for use

  • 5.1 Use a wipe soaked in medical alcohol to clean the flash window.

    5.2 Press the power button for 1 second. The device starts and enters operational mode (the green light turns on and you will hear the system powering up).

    Notes:

    1. The red light turns on after startup.
    2. Then place the flash window on your skin: the red light will start to blink, as a skin contact sensor is integrated into the window and detects the skin when in contact.
    3. The red light must blink, otherwise the device will not work. If the light does not blink, bring the flash window closer to the skin until it blinks.

  • 5.3 Briefly press the power button to select the appropriate intensity level.

    • The device has 5 intensity levels, indicated by blue lights.
    • Level 1 corresponds to the minimum power, and level 5 to the maximum power.
    • Each new press allows you to move to the next level in ascending order.


  • 5.4 Once the intensity level is chosen, place the flash window flat against the skin (the surface must completely cover the flash area).

    • When the red light blinks, press the flash button: the device will emit a single flash.
    • After each flash, the red light turns off for 1 to 3 seconds to recharge, then turns back on indicating that the device is ready for use again.


    Notes:

    • For optimal results, it is recommended to repeat the process 2 to 3 times per area, ensuring to cover the entire surface without omissions or excessive overlaps.
    • If the red light stays on without blinking, proceed as follows:
      Ensure that the flash window is in contact with the skin.
      If the light remains steady, hold the window against the skin for 3 to 5 seconds and check if it starts blinking again.
      If the problem persists, restart the device.
      If this does not resolve the issue, contact our customer service.


    5.5 If the device remains unused for more than 5 minutes, it automatically enters sleep mode.

    • Simply press the power button to reactivate it.
    • Note that upon restarting, the intensity automatically returns to level 1.


    5.6 To turn off the device, press and hold the power button for 3 seconds.


    5.7 After use, clean the flash window with a wipe soaked in medical alcohol as recommended.


    Note:

    After frequent use, small white spots may appear inside the lens.

    • This is normal and does not affect the operation or lifespan of the device.


  • Hair management process

  • 6.1 Test before use

    It is strongly recommended to check for any adverse reaction by performing a patch test at least 2 hours before any hair removal session.

    Testing method:

    • Choose a small area of skin on the inside of the arm (inner side).
    • Apply 1 to 2 flashes to the same spot, starting with a low intensity and gradually increasing.
    • After 2 hours, if you notice redness, burning, sharp pain, or any other abnormal symptoms, do not continue and consult a doctor.
    • In case of mild discomfort, use the device at a lower intensity during the next session.
    • If discomfort persists, consult a doctor before any further use.


    6.2 Usage steps

    6.2.1 Clean the flash window, then shave the area to be treated and remove any residual hair.

    6.2.2 Turn on the device and select the intensity level best suited for hair removal.

    6.2.3 After the session, refresh the skin using cold water or a cold, damp towel.

    6.2.4 You may apply a toner to help the skin retain its moisture after hair removal.

    6.2.5 For suggestions on intensity levels based on skin types and body areas, please refer to the comparison table below.

    6.2.6 It is strongly discouraged to use the device multiple times on the same area of skin during a single session.

    • Do not flash more than twice in a row on the same area.
    • When using high energy levels, reduce the frequency of application on the affected area.


  • Note:

    • Perform 6 to 10 sessions to complete a full hair removal cycle.
    • During the first 6 sessions: use the device once a week.
    • Then (up to the 10th session): use it once every two weeks.
    • If you notice the appearance of new fine hairs after this phase, treat the area once a month to maintain satisfactory results.
    • To achieve the best results, it is recommended to treat the areas with thick hair multiple times over a certain period.
    • The effectiveness may vary from person to person: when the area shows only about 30% regrowth, you can reduce the frequency of use.

  • 7. Device usage notes


  • 7.1 Do not use the device near the eyes or directly towards the eyes.

    7.2 After use, slight redness of the skin is normal. You can cool the area with ice water or a cold, damp towel.

    7.3 Do not clean the flash window directly with an alcohol spray.

    7.4 Do not use at the same time as other cosmetic products such as water-based gels.

    7.5 Avoid consuming photosensitizing foods during use (e.g.: spinach, cabbage, mustard, etc.).

    7.6 For best results, use a higher energy setting.

    ⚠️ Attention: only after properly following the previous instructions.

    7.7 The darker the skin, the less visible skin reactions may be, and they may be delayed. In this case, wait 2 hours before increasing the intensity level.

    7.8 Continue to take care of your skin after use: hydration and application of sunscreen as usual.

    7.9 Avoid UV exposure during use. Always protect your skin when you are in the sun.

    7.10 Do not block the air intake or exhaust to avoid affecting the device's cooling system.

    7.11 Hairs stuck in the device may cause small white areas ("blank spots"), but this does not affect performance or normal use.

    7.12 At the end of the product's life, a gradual darkening may appear on the inner wall of the bulb. This is a normal phenomenon related to the aging of the tube, which does not prevent its use in the specified settings.

    7.13 This device is not waterproof: avoid any contact with water.

    7.14 In case of malfunction, immediately unplug the device.

    If you notice that the casing or the flash window glass is damaged, return it to the factory for maintenance.

    7.15 Do not store the device near strong magnetic fields, moisture, dust, or at high temperatures.

    7.16 Avoid any shock or damage, and keep the device out of reach and sight of children.

    7.17 Do not use the device for purposes other than those intended.

    7.18 Do not allow anyone to open the device other than our authorized personnel, at the risk of causing an electric shock hazard.